Christie CP2210 Service Manual page 80

Section 5: Parts and Module Replacement
7. Pull up the plunger located at the top of the cardcage and slide the cardcage out along the guides.
(Figure 5-54)
8. Tilt the cardcage up and out to remove. (Figure 5-55)
9. Reverse the above steps to reinstall the cardcage module. When reinstalling, ensure that the rails on the
bottom of the cardcage line up with the guide rails inside the housing.
5-38
Figure 5-54 Plunger
Figure 5-55 Remove Cardcage
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)