Liquid Cooling Assembly - Christie CP2210 Service Manual

Section 5: Parts and Module Replacement
7. Reverse the above steps to reinstall the LVPS.

5.5.27 Liquid Cooling Assembly

The liquid cooling assembly consists of a pump, coolant reservoir, radiator and radiator fan. All are connected
together with hoses, and are mounted within the front left portion of the projector.
(Estimated Replacement Time: 30 minutes)
1. Remove the top lid. Refer to
2. Remove the side skin service door. Refer to
3. Open the radiator compartment by loosening the captive screw. Refer to
page 5-12.
4. Disconnect the pump harness (Figure 5-40) .
5-28
Figure 5-39 Disconnect AC Harnesses
5.5.5 Top Lid, on page
5.5.9 Side Skin Service Door, on page
Figure 5-40 Disconnect the Pump Harness
5-7.
Figure 5-15 Radiator Filter, on
5-9.
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)