Christie CP2210 Service Manual page 33

3. In the Arming window, click the Arm Marriage button (Figure 3-6). A 30 second count-down timer
begins (Figure 3-7). The LED in the Marriage button on the PI Board will flash green during this count-
down. You MUST press the Marriage button on the PIB within this 30 second window in order for the
marriage to take effect. When the Marriage button is pressed, the LED button will change to a solid green
to indicate a successful marriage.
Figure 3-7 Press Marriage Button on PI Board after Clicking Arm Marriage Button
4. The Finish window states if the marriage was successful or not. Click the Finish button to return to the
Main panel.
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
Section 3: Service Setup
3-9