Christie CP2210 Service Manual page 121

Projector Platform and Motherboard Related Information (SYS)
Query only command that returns version information.
SUBCODE DESCRIPTION OF USE
BACB
Return backplane version information.
FACB
Return faceplate version information.
PIBB
Return PIB version information.
EXAMPLES:
(SYS+BACB?) Returns backplane version information.
Target Color Gamut (TCG)
Set the Target Color Gamut file. This file describes desired output colorimetry from the projector. For this control
to function the Measured Color Gamut Data must be accurate.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select target color gamut for the current channel.
EXAMPLES:
(TCG+C108 "Atlantis") Use file "Atlantis" on channel 108
(TCG+C108? ) Get target color file name on channel 108
(TCG?L) List all available entries of target color control
Enable 3D (TDC)
Enable/disable 3D on the specified channel or the current channel. This controls the frame rate multiplication fea-
tures that allow for simulated three dimensional image projection.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select 3D enable for the current channel
EXAMPLES:
(TDC+C108 1) Enable 3D on channel 108
(TDC+C108?) Get 3D setting on channel 108
(TDC?) Get current 3D status
3D Dark Time (TDK)
Set dark time for 3D control. This controls how much time between displayed images the output remains dark to
allow for the glasses on other gating mechanism to flip between the eyes.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select dark time for the current channel
EXAMPLES:
(TDK+C101 1) Set dark time to 1 on channel 101
(TDK+C101?) Get dark time on channel 101
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
Section 7: Serial API
7-21