Overview; Troubleshooting - Christie CP2210 Service Manual

4 Troubleshooting

This section provides troubleshooting procedures that can help direct you to the most likely cause
of a specific performance problem.
4.1

Overview

The CP2210 offers a comprehensive system of diagnostics, tracking a wide range of conditions and
alerting the operator to a potential problem by display specific status information at the Touch Panel
Controller (TPC) or using the available internal or external LEDs.
This system includes:

TPC Status Menu

TPC Alarm Windows

External Projector Status LEDs

Internal PCB-specific LEDs and Main AC status LED
If warnings and errors reported at these locations cannot be resolved by the operator or administrator,
further troubleshooting by a Christie authorized service technician may be required. When
troubleshooting, keep in mind that the projector consists of numerous replaceable modules, such as
printed circuit boards, optical assemblies and power supplies. This modular design can reduce the
amount of time required to accurately diagnose and resolve a performance issue — the cause need only
be traced down to the module level, at which point the faulty module is usually replaced. No further
analysis is necessary.
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
4-1