Christie CP2210 Service Manual page 118

Section 7: Serial API
EXAMPLES:
(RAL 0) Disable remote serial protocol access for all Ethernet ports
(RAL?) Get access level for Ethernet ports (RAL!0)
(RAL+PRTA 2) Set remote serial protocol access level on port A to free access
(RAL+PRTA?) Get access level (RAL+PRTA!2)
Reboot TPC (RBT)
Command for rebooting the TPC, requires argument 3.
SUBCODE DESCRIPTION OF USE
NONE
Reboot TPC, use 3 as argument other arguments have no effect.
Screen Format (SCF)
elect Screen format file which describes the geometry for the output image.
S
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select screen file for the current channel.
EXAMPLES:
(SCF+C108 "FLAT") Use file "FLAT" on channel 108
(SCF+C108?) Get screen file name on channel 108
(SCF?L) List all available entries of screen control
Shutter/Douser (SHU)
Open/Close shutter/douser
SUBCODE DESCRIPTION OF USE
NONE
Select douser position 0 - douser removed from optical path 1 - douser blocking optical path
STEP
The number of steps the douser should be moved when opening/closing (default 60, minimum 30, maxi-
mum 200)
EXAMPLES:
(SHU 1) Close shutter
(SHU 0) Open shutter
(SHU?) Get current status of shutter
(SHU+STEP?) Get number of steps douser should move to open/close
Select Input (SIN)
Selecting input port will reset the list and default data of DTF control. Use index number or text description to
select input port. Available options are:
"Auto-select",
"292-A",
"292-B",
"292-Dual",
"DVI-A",
"DVI-B",
"DVI-Dual/Twin"
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select input for current channel
7-18 CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)