Christie CP2210 Service Manual page 129

SMPTE RP 211
SMPTE RP 211
DCI**
DCI**
NOTES: 1) All formats supported at 10 bit 4:2:2 YCbCr or lower. **
supported at 12 bit 4:4:4 XYZ.
configuration they will support all the formats listed in Table 8.1 in 4:4:4 YCbCr or RGB format with 10 or 12
bits per component. Also supported is 4:2:2 YCbCr progressive input with 10 or 12 bits per component and a
pixel format of 1920 x 1080 at 47.96 or 48 fps. 3) For 3D content, the supported format is 4:2:2 YCbCr 10 bit
per eye.
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
1920 x 1080 25
1920 x 1080 29.97 / 30
640 x 480 23.98 / 24
640 x 480 25
640 x 480 29.97 / 30
640 x 480 48
640 x 480 50
640 x 480 59.94 / 60
640 x 480 100
640 x 480 120
720 x 525 23.98 / 24
720 x 525 25
720 x 525 29.97 / 30
720 x 525 48
720 x 525 50
720 x 525 59.94 / 60
720 x 525 100
720 x 525 120
2048 x 1080 24
2048 x 1080 48
2) When both SMPTE 292M inputs are used together in a dual-link
Progressive (sF) 25
Progressive (sF) 29.97 / 30
Progressive 23.98 / 24
Progressive 25
Progressive 29.97 / 30
Progressive 48
Progressive 50
Progressive 59.94 / 60
Progressive 100
Progressive 120
Interlaced 11.99 / 12
Interlaced 12.5
Interlaced 14.985 / 15
Interlaced 24
Interlaced 25
Interlaced 29.97 / 30
Interlaced 50
Interlaced 60
Progressive 24
Progressive 48
DCI formats (SMPTE 428-9) are
Section 8: Specifications
8-3