Christie CP2210 Service Manual page 104

Section 7: Serial API
Data Format (DTF)
Select data packing format for selected input. Available data formats depends on current input port (as selected by SIN).
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select data format for current channel
EXAMPLES:
(DTF?) Get current data format
(DTF?L) Show entries on the list
(DTF 1) Set current data format to 1 (292: 422 Packed 12Bit)
(DTF+C108?) Get data format on channel 108
(DTF+C108 20) Use data format 20 (DVI: Unpacked 8Bit) on channel 108
Enable Error Messages (EME)
Enable broadcasting error messages.
SUBCODE DESCRIPTION OF USE
FANF
0 - No Fan Fail warning will be generated,
1 - Fan Fail warning will be generated.
NONE
0 - Disable broadcast,
1 - Enable broadcast of error messages to all connected serial ports and telnet sessions.
TEMP
0 - No Over Temperature warning will be generated,
1 - Over Temperature warning will be generated.
EXAMPLES:
(EME 1) Enable broadcasting error messages
(EME+FANF 0) Disable fan fail alarm warnings
(EME?) Requests current state of broadcast. Example response is (EME!001)
7-4 CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)