Installing The Disk Carriers And Disk Drives - Overland Storage REO 1000 Setup Manual

Overland Storage REO™ 1000 with Protection OS™ Software
13

Installing the Disk Carriers and Disk Drives

1
2
3
00
4
"
30 Setting Up the Appliance
Slide the appliance into the rack, and attach the captive screw on each
panel extension (left and right sides) to the rack and nut plate.
The disk carriers, which contain the disk drives, are packaged
separately, which allows you to insert them into the appliance after you
have installed the chassis in the rack.
Remove the package of desiccant from each disk carrier.
Insert the first disk carrier in to the applicable slot in the chassis.
Close the disk carrier by doing the following:
a Make sure that the lever is in its fully extended, open position.
b Press the right side of the carrier into the slot.
c Press the lever in. Pressing the lever in draws the carrier fully into the
slot and locks it in place.
01
Repeat these steps for each disk carrier.
REO10069
02 03