Add Iscsi Initiator Access For Standalone Devices - Overland Storage REO 4600 User Manual

REO 4600 User Guide
2. To change the iSCSI target name:
a. Click Modify.
b. Enter a new iSCSI target name.
c. Click Apply.
d. At the message about shutting down initiators, click OK.
The Standalone Device Summary screen is redisplayed.
3. To expand the size of a fixed-sized virtual tape:
NOTE: Since a DVT uses dynamic sizing, it expands (and contracts) its size automatically.
a. Click Expand.
b. In the Expand Device By field, enter the number of additional gigabytes you are
adding to the existing size.
c. Click Expand.
d. At the message about shutting down initiators, click OK.
The Standalone Device Summary screen is redisplayed.
4. To remove a virtual tape device:
a. Click Remove.
b. At the warning message, click OK (or Cancel).
The Standalone Device Summary screen is redisplayed.

Add iSCSI Initiator Access for Standalone Devices

To be able to use a REO virtual device, it must first be connected to an initiator.
1. Under the Create tab, click iSCSI Initiator Access
10400253-101 01/2010
Figure 6-7: Standalone Device Summary Screen
©2007-10 Overland Storage, Inc.
Configuring Virtual Devices
(Figure 6-8).
6-6