Examples
# Configure a link-local address for the VLAN-interface 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 address fe80::1 link-local
ipv6 host
Syntax
ipv6 host hostname ipv6-address
undo ipv6 host hostname [ ipv6-address ]
View
System view
Parameters
hostname: Host name, a string of up to 20 characters. The character string can contain letters,
numerals, "_", "-", or "." and must contain at least one letter.
ipv6-address: IPv6 address.
Description
Use the ipv6 host command to configure the mapping between host name and IPv6 address.
Use the undo ipv6 host command to remove the mapping between host name and IPv6 address.
Each host name can correspond to only one IPv6 address. A newly configured IPv6 address will
overwrite the previous one.
Related commands: display ipv6 host.
Examples
# Configure the mapping between host name and IPv6 address.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ipv6 host aaa 2001::1
ipv6 icmp-error
Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval }*
undo ipv6 icmp-error
View
System view
Parameters
bucket-size: Number of tokens in a token bucket, in the range of 1 to 200. The default value is 10.
1-21