Retry Stop-Accounting; Secondary Accounting - 3Com Switch 4500 Family Manual

[Sysname-radius-radius1] retry realtime-accounting 10

retry stop-accounting

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Parameters
retry-times: Maximum number of transmission attempts of a buffered stop-accounting request, ranging
from 10 to 65,535.
Description
Use the retry stop-accounting command to set the maximum number of transmission attempts of a
stop-accounting request buffered due to no response.
Use the undo retry stop-accounting command to restore the default maximum number of
transmission attempts of a buffered stop-accounting request.
By default, the maximum number of stop-accounting request transmission attempts is 500.
Stop-accounting requests are critical to billing and will eventually affect the charges of users; they are
important to both users and ISPs. Therefore, the switch should do its best to transmit them to RADIUS
accounting servers. When getting no response to such a request, the switch should first buffer the
request on itself, and then retransmit the request to the RADIUS accounting server until it gets a
response, or the maximum number of transmission attempts is reached (in this case, it discards the
request).
Related commands:
stop-accounting-buffer.
Examples
# In RADIUS scheme radius1, specify that the switch can transmit a buffered stop-accounting request
at most 1000 times
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] retry stop-accounting 1000

secondary accounting

Syntax
secondary accounting ip-address [ port-number ]
reset stop-accounting-buffer,
1-49
radius scheme, display