Radius-Scheme - 3Com Switch 4500 Family Manual

Description
Use the password command to set a password for the local user.
Use the undo password command to cancel the password of the local user.
Note that:
With the local-user password-display-mode cipher-force command configured, the password
is always displayed in cipher text, regardless of the configuration of the password command.
With the cipher keyword specified, a password of up to 16 characters in plain text will be encrypted
into a password of 24 characters in cipher text, and a password of 16 to 63 characters in plain text
will be encrypted into a password of 88 characters in cipher text. For a password of 24 characters,
if the system can decrypt the password, the system treats it as a password in cipher text.
Otherwise, the system treats it as a password in plain text.
Related commands: display local-user.
Examples
# Set the password of user1 to 20030422 and specify to display the password in plain text.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-user user1
New local user added.
[Sysname-luser-user1] password simple 20030422

radius-scheme

Syntax
radius-scheme radius-scheme-name
View
ISP domain view
Parameters
radius-scheme-name: Name of a RADIUS scheme, a string of up to 32 characters.
Description
Use the radius-scheme command to configure a RADIUS scheme for current ISP domain.
After an ISP domain is initially created, it uses the local AAA scheme instead of any RADIUS scheme
by default.
The RADIUS scheme you specified in the radius-scheme command must already exist. This
command is equivalent to the scheme radius-scheme command.
Related commands: radius scheme, scheme, display radius scheme.
Examples
# Configure the ISP domain "aabbcc.net" to use the RADIUS scheme "extended".
1-20