Ftp Disconnect - 3Com Switch 4500 Family Manual

Description
Use the display ftp-user command to display the information of the FTP users that have logged in to
the switch, including the user name, host IP address, port number, idle timeout time, and authorized
directory.
For how to create an FTP user on an FTP server, refer to the AAA part of this manual.
Examples
# Display the information of the FTP users that have logged in to the switch.
<Sysname> display ftp-user
UserName
admin
# If the username exceeds ten characters, characters behind the tenth will be displayed in the second
line with a left-aligning mode. Take username username@test for example, the result is:
<Sysname> display ftp-user
UserName
administra
tor
Table 1-2 display ftp-user command output description
Field
HostIP
Port
Idle
HomeDir

ftp disconnect

Syntax
ftp disconnect user-name
View
System view
Parameters
user-name: Name of the user to be disconnected from the FTP server, a string of 1 to 184 characters.
HostIP Port
192.168.0.152 1029
HostIP Port
192.168.0.152 1031
IP address of the FTP client
Port used when the FTP client logs in
Idle time of the FTP client
The initial work path configured for the FTP user, namely, the path
where the user locates after he logs in.
Idle HomeDir
0
Idle HomeDir
0
Description
1-3
flash:
flash: