3Com Switch 4500 Family Manual page 676

Examples
# View the brief information of all sessions maintained by NTP services.
<Sysname> display ntp-service sessions
source
*************************************************************************
[12345]3.0.1.32
[25]3.0.1.31
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations :
Table 1-1 display ntp-service sessions command output description
source
reference
stra
reach
poll
now
offset
delay
disper
[12345]
reference stra reach poll
LOCL
127.127.1.0
2
Field
now offset
1 95 64 42
2 1 64 1 4408.6
IP address of the synchronization source
Reference clock ID of the synchronization
source
1) If the reference clock is the local clock, the
value of this field is related to the value of
the stra field:
When the value of the stra field is 0 or 1, this
field will be "LOCL";
When the stra field has another value, this
filed will be the IP address of the local clock.
2) If the reference clock is the clock of another
switch on the network, the value of this field
will be the IP address of that switch.
Stratum of the clock of the synchronization
source
Reachability count of the clock source. 0
indicates that the clock source is unreachable
Polling interval in seconds, that is, the maximum
interval between two successive packets
Time elapsing since the last NTP packet is sent
The offset of the system clock relative to the
reference clock, in milliseconds
Network delay, that is, the roundtrip delay from
the local switch to the clock source, in
milliseconds
Maximum offset of the local clock relative to the
reference clock
1: Clock source selected by the system, namely
the current reference source, with a system clock
stratum level smaller than or equal to 15
2: Stratum level of this clock source is smaller
than or equal to 15
3: This clock source has passed the clock
selection process
4: This clock source is a candidate clock source
5: This clock source was created by a
configuration command
1-2
delay disper
-14.3 12.9 2.7
38.7 0.0
Description