Display Users - 3Com Switch 4500 Family Manual

# Display the summary information about the user interface.
<Sysname> display user-interface summary
User interface type : [AUX]
0:XXXX XXXX
User interface type : [VTY]
8:UXXX X
1 character mode users.
12 UI never used.
1 total UI in use
Table 1-2 display user-interface summary command output description
User interface type
0: XXXX XXXX/8:UXXX X
character mode users.
UI never used.
total UI in use.

display users

Syntax
display users [ all ]
View
Any view
Parameters
all: Displays the user information about all user interfaces.
Description
Use the display users command to display the login user information about user interfaces, including
AUX user interfaces and VTY user interfaces.
If you do not specify the all keyword, only the user information about the user interface that is being
used is displayed.
(U)
(X)
Field
(U)
(X)
User interface type: AUX or VTY
0 and 8 represent the least absolute number for
AUX user interfaces and VTY user interfaces.
"U" and "X" indicate the usage state of an
interface: U indicates that the corresponding
user interface is used; X indicates that the
corresponding user interface is idle. The total
number of Us and Xs is the total number of user
interfaces that are available.
The number of current users, that is, the number
of Us
The number of user interfaces not being used
currently, that is, the number of Xs
The total number of user interfaces being used
currently, that is, the total number of users
currently logging in to the switch successfully
1-8
Description