3Com Switch 4500 Family Manual page 864

remote-ping entry(admin administrator, tag icmp) test result:
Destination ip address:1.1.1.99
Send operation times: 10
Min/Max/Average Round Trip Time: 2/5/2
Square-Sum of Round Trip Time: 66
Last complete test time: 2000-4-2 7:59:54.7
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
Table 1-1 Description on the fields of the display remote-ping results command
Destination ip address
Send operation times
Receive response times
Min/Max/Average Round Trip Time
Square-Sum of Round Trip Time
Last complete test time
SD Maximal delay
DS Maximal delay
Packet lost in test
Disconnect operation number
Operation timeout number
System busy operation number
Connection fail number
Operation sequence errors
Drop operation number
Other operation errors
# Use the display remote-ping history command to display test results.
<Sysname> display remote-ping history administrator icmp
remote-ping entry(admin administrator, tag icmp) history record:
Index Response
1
Field
Status
1 1
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Destination IP address
Number of send operations
Number of successful test operations
Smallest/biggest/average round-trip time
The square sum of the round trip time
Time of the last successful test
Maximal delay from the source to the destination
Maximal delay from the destination to the source
Packet lost ratio in the test.
Number of forced disconnections by the opposite
side
Number of timeout times in the test operation
Number of test failures because the system is
busy
Number of connection failures
Number of received sequence error packets
Number of system resource allocation errors
Number of other errors
LastRC Time
0 2004-11-25 16:28:55.0
1-3
Description