3Com Switch 4500 Family Manual page 842

Table 3-8 Description on the fields of the display transceiver interface command
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name
display transceiver manuinfo interface
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Field
3-11
Description
Transceiver information of the interface
Transceiver type
Type of the connectors of the transceiver:
Optical connectors,
connector, developed by NTT) and LC (LC
connector, 1.25 mm/RJ45 optical connector
developed by Lucent).
Other connectors, including RJ-45 and CX4.
Optical transceiver: central wavelength of the
laser sent, in nm. If the transceiver supports
multiple wavelengths, every two wavelength
values are separated by a comma.
Electrical transceiver: displayed as N/A.
Transfer distance, with xx representing km for
single-mode transceivers and m for other
transceivers. If the transceiver supports multiple
transfer medium, every two values of the transfer
distance are separated by a comma. The
corresponding transfer medium is included in the
bracket following the transfer distance value.
The following are the transfer media:
9 um: 9/125 um single-mode fiber
50 um: 50/125 um multi-mode fiber
62.5 um: 62.5/125 um multi-mode fiber
TP: Twisted pair
CX4: CX4 cable
Whether the digital diagnosis function is
supported, where:
YES: supported
NO: not supported
Vendor name or vendor name specified of the
transceiver:
The anti-spoofing transceiver customized by
H3C: H3C is displayed.
Other transceivers: The original vendor name
is displayed.
Ordering name of the transceiver
including SC (SC