Display Logbuffer - 3Com Switch 4500 Family Manual

SNMP Agent
Log buffer
Trap buffer
Information timestamp setting:
XRN SWITCH OF Device--Unit>1

display logbuffer

Syntax
display logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameters
unit-id: Unit ID of the device.
level severity: Specifies an information severity level. The severity argument ranges from 1 to 8.
Table 1-2 Severity level defined in the information center
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
Field
Severity value
1
2
3
4
5
6
7
Information about SNMP Agent, including name
and number of its information channel
Information about the log buffer, including its
state (enabled or disabled), its maximum size,
current size, current messages, information
channel name and number, number of dropped
messages, and number of overwritten messages
Information about the trap buffer, including its
state (enabled or disabled), maximum size,
current size, current messages, channel number
and name, number of dropped messages, and
number of overwritten messages
Information about the time stamp setting,
showing the time stamp format of the log, trap
and debugging information
Information about the information output state of
the device (enabled or disabled), showing
whether the log, trap and debugging information
output are enabled on the device
The system is unavailable.
Information that demands
prompt reaction
Critical information
Warnings
Normal information that needs
to be noticed
Informational information to be
recorded
1-3
Description
Description
Error information