3Com Switch 4500 Family Manual page 14

In absolute user interface number scheme, the type argument is not required. In this case, user
interfaces are numbered from 0 to 12.
summary: Displays the summary information about a user interface.
Description
Use the display user-interface command to display the information about a specified user interface or
all user interfaces. If the summary keyword is not specified, this command displays user interface type,
absolute/relative user interface index, transmission speed, available command level, authentication
mode, and physical position. If the summary keyword is specified, this command displays the number
and type of the user interfaces, including those that are in use and those that are not in use.
Examples
# Display the information about user interface 0.
<Sysname> display user-interface 0
Idx Type
F 0 AUX 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 1-1 display user-interface command output description
+
F
Idx
Type
Tx/Rx
Modem
Privi
Auth
Int
A
N
P
Tx/Rx Modem Privi Auth
19200 - 3
Filed
Int
N -
The user interface is in use.
The user interface operates in asynchronous
mode.
The absolute index of the user interface
User interface type and the relative index
Transmission speed of the user interface
Indicates whether or not a modem is used.
Available command level
Authentication mode
Physical position of the user interface
The current user authentication mode is scheme.
The current user authentication mode is none.
The current user authentication mode is
password.
1-7
Description