Accounting Optional; Attribute - 3Com Switch 4500 Family Manual

accounting optional

Syntax
accounting optional
undo accounting optional
View
ISP domain view
Parameters
None
Description
Use the accounting optional command to open the accounting-optional switch.
Use the undo accounting optional command to close the accounting-optional switch so that the
system performs accounting for users unconditionally.
By default, the system performs accounting for users unconditionally..
Note that:
If the system does not find any available accounting server or fails to communicate with any
accounting server when it performs accounting for an online user, it will not disconnect the user as
long as the accounting optional command has been executed.
The accounting optional command is commonly used in the cases where only authentication is
needed and accounting is not needed.
If you configure the accounting optional command in ISP domain view, it is effective to all users
in the domain; if you configure it in RADIUS scheme view, it is effective to users the RADIUS
scheme is used for.
Examples
# Open the accounting-optional switch for the ISP domain named aabbcc.net.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] accounting optional

attribute

Syntax
attribute { ip ip-address | mac mac-address | idle-cut second | access-limit max-user-number | vlan
vlan-id | location { nas-ip ip-address port port-number | port port-number } }*
undo attribute { ip | mac | idle-cut | access-limit | vlan | location }*
1-3