Display Detect-Group - 3Com Switch 4500 Family Manual

display detect-group

Syntax
display detect-group [ group-number ]
View
Any view
Parameters
group-number: Detected group number ranging from 1 to 25.
Description
Use the display detect-group command to display the configuration of the specified detected group or
all detected groups.
Examples
# Display the configuration of detected group 1.
<Sysname> display detect-group 1
detect-group 1 :
detect loop time(s) : 15
ping wait time(s) : 2
detect retry times : 2
detect ip option : and
group state : not detecting
register module num : 0
detect ip count : 1
detect-list ip address
1 202.13.1.55
Table 1-1 Description on the fields of the display detect-group command
detect-group 1
detect loop time(s)
ping wait time(s)
detect retry times
detect ip option
group state
register module num
detect ip count
detect-list
next hop
1.2.3.4
Field
Detected group number 1
Detecting interval, in seconds.
Timeout time of a ping operation, in seconds.
Number of retries of an auto detect operation.
The logic relationship between the detected
objects in the detected group. It can be and or
or.
Current state of the detected group
Number of registered modules (that is, the
number of the modules utilizing the detected
group.)
Number of the IP addresses contained in a
detected group
Sequence number of an IP address contained in
a detected group
1-3
Description