Duplex
ntdp enable
Syntax
ntdp enable
undo ntdp enable
View
System view, Ethernet port view
Parameters
None
Description
Use the ntdp enable command to enable NTDP globally or on a port.
Use the undo ntdp enable command to disable NTDP globally or on a port.
By default, NTDP is enabled both globally and on ports.
Note that NTDP can take effect on a port only when NTDP is enabled both globally and on the port.
Examples
# Enable NTDP globally, and then enable NTDP on port Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ntdp enable
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ntdp enable
ntdp explore
Syntax
ntdp explore
View
User view
Parameters
None
Description
Use the ntdp explore command to manually start a topology collection process.
NTDP is able to periodically collect topology information. In addition, you can use this command to
manually start a topology collection process at any moment. If you do this, NTDP collects NDP
Field
Duplex mode of the neighbor device port
1-9
Description