3Com Switch 4500 Family Manual page 807

Hide thumbs Also See for Switch 4500 Family:

Table of Contents

After you separately set the output rules for a module, you must use the module-name argument to

modify or remove the rules. The new configuration by using the default keyword is invalid on the

You can configure to output the log, trap and debugging information to the trap buffer, but the trap

buffer only receives the trap information and discards the log and debugging information.

You can configure to output the log, trap and debugging information to the log buffer, but the log

buffer only receives the log and debugging information and discards the trap information.

You can configure to output the log, trap and debugging information to the SNMP module, but the

SNMP module only receives the trap information and discards the log and debugging information.

Table 1-4 Default output rules for different output destinations

# Set the output channel for the log information of VLAN module to snmpagent and to output

information with severity being emergencies. Log information of other modules cannot be output to this

<Sysname> system-view

[Sysname] info-center source default channel snmpagent log state off

[Sysname] info-center source vlan channel snmpagent log level emergencies state on

Chapters

Table of Contents

4500 26-port 4500 50-port 4500 pwr 26-port