Quick Ead Deployment Configuration Commands; Dot1X Free-Ip - 3Com Switch 4500 Family Manual

2

Quick EAD Deployment Configuration Commands

Quick EAD Deployment Configuration Commands

dot1x free-ip

Syntax
dot1x free-ip ip-address { mask-address | mask-length }
undo dot1x free-ip [ ip-address { mask-address | mask-length } ]
View
System view
Parameters
ip-address: Free IP address, in dotted decimal notation.
mask-address: Subnet mask of the free IP address, in dotted decimal notation.
mask-length: Length of the subnet mask of the free IP address, in the range 0 to 32.
Description
Use the dot1x free-ip command to configure a free IP range. A free IP range is an IP range that users
can access before passing 802.1x authentication.
Use the undo dot1x free-ip command to remove a specified free IP range or all free IP ranges.
By default, no free IP range is configured.
You must configure the URL for HTTP redirection before configuring a free IP range.
The device supports up to two free IP ranges.
Examples
# Configure a free IP range for users to access before passing authentication.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x free-ip 192.168.19.23 24
2-1