Ssh2 Source-Ip; Ssh-Server Source-Interface - 3Com Switch 4500 Family Manual

Description
Use the ssh2 source-interface command to specify a source interface for the SSH client. If the
specified interface does not exist, the command fails.
Use the undo ssh2 source-interface command to cancel the source interface setting. You can
configure an IP address by specifying the corresponding interface for the client to use to access the
SSH server. This improves the service manageability when the SSH client has multiple IP addresses
and interfaces.
Examples
# Specify source interface Vlan-interface 1 for the SSH client.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh2 source-interface Vlan-interface 1

ssh2 source-ip

Syntax
ssh2 source-ip ip-address
undo ssh2 source-ip
View
System view
Parameters
ip-address: Source IP address.
Description
Use the ssh2 source-ip command to specify a source IP address for the SSH client. If the specified IP
address is not an address of the device, the command fails.
Use the undo ssh2 source-ip command to cancel the source IP address setting.
You can specify a souce IP address for the client to use to access the SSH server. This improves the
service manageability when the SSH client has multiple IP addresses.
Examples
# Specify source IP address 192.168.1.1 for the SSH client.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh2 source-ip 192.168.1.1

ssh-server source-interface

Syntax
ssh-server source-interface interface-type interface-number
undo ssh-server source-interface
1-31