Info-Center Channel Name - 3Com Switch 4500 Family Manual

Absence of the size buffersize argument indicates that all trap information is displayed.
Examples
# Display the status of the trap buffer and the records in the trap buffer.
<Sysname> display trapbuffer
Trapping Buffer Configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 19
#Apr 1 23:55:35:859 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227762, ifAdminStatus is 1, ifOperStatus
is 1
#Apr 1 23:55:36:059 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227794, ifAdminStatus is 1, ifOperStatus
is 1
......
<Omitted>

info-center channel name

Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameters
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the
system.
channel-name: Channel name, up to 30 characters in length. The name must start with an English letter,
containing no special character but numbers and English letters only.
Description
Use the info-center channel name command to name the channel whose number is channel-number
as channel-name.
Use the undo info-center channel command to restore the default name of the channel whose
number is channel-number.
By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost, trapbuffer,
logbuffer, snmpagent, channel6, channel7, channel8, channel9.
Do not configure two different channels with the same name.
1-6