View
User view
Parameters
None
Description
Use the reset udp-helper packet command to clear UDP Helper statistics.
Examples
# Clear UDP Helper statistics.
<Sysname> reset udp-helper packet
udp-helper enable
Syntax
udp-helper enable
undo udp-helper enable
View
System view
Parameters
None
Description
Use the udp-helper enable command to enable UDP Helper function. After this function is enabled,
the switch converts broadcasts containing the specified port numbers into unicasts and forwards them
to the destination server.
Use the undo udp-helper enable command to disable UDP Helper function.
By default, UDP Helper is disabled.
Examples
# Enable UDP Helper.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] udp-helper enable
udp-helper port
Syntax
udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
undo udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
View
System view
1-2