Mirroring-Group - 3Com Switch 4500 Family Manual

type: remote-source
status: active
mirroring port:
Ethernet1/0/1
reflector port: Ethernet1/0/2
remote-probe vlan: 10
# Display the configurations of a remote destination mirroring group on your Ethernet
switch.
<Sysname> display mirroring-group 3

mirroring-group 3:

type: remote-destination
status: active
monitor port: Ethernet1/0/3
remote-probe vlan: 20
Table 1-1 Description on the fields of the display mirroring-group command
mirroring-group
type
status
mirroring port
both/inbound/outbound
monitor port
reflector port
remote-probe vlan
inbound
Field
Port mirroring group number.
Port mirroring group type, which can be
local, remote-source, or
remote-destination.
Status of the port mirroring group, which
can be active or inactive.
Source port in port mirroring. This field is
available only for local mirroring groups or
remote source mirroring groups.
The direction of the mirrored packets,
which can be one of the following:
both: means packets received on and
sent from
mirrored.
Inbound: means packets received on
the mirroring port are mirrored.
outbound: means packets sent from the
mirroring port are mirrored.
Destination port. This field is available only
for local mirroring groups and remote
destination mirroring groups.
Reflector port. This field is available only
for remote source mirroring groups.
Remote probe VLAN. This field is available
only for remote source/destination
mirroring groups.
1-2
Description
the mirroring port are