3Com Switch 4500 Family Manual page 4

27 UDP Helper
28 SNMP-RMON
29 NTP
30 SSH
31 File System Management
32 FTP-SFTP-TFTP
33 Information Center
34 System Maintenance and
Debugging
35 VLAN-VPN
36 Remote-ping
37 IPv6 Management
38 Access Management
39 Appendix
Conventions
The manual uses the following conventions:
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
&<1-n>
#
Part
Introduces the commands used for configuring UDP helper
Introduces the SNMP-related and RMON-related commands.
Introduces the NTP-related commands.
Introduces the commands used for configuring SSH2.0
Introduces the commands used for file system management.
Introduces the FTP/SFTP/TFTP-related commands.
Introduces the commands used for configuring the information
center.
Introduces the commands used for system maintenance and
debugging.
Introduces the VLAN-VPN-related and the selective
QinQ-related commands
Introduces the Remote-ping related commands.
Introduces the commands used for IPv6 Management.
Introduces the commands used for Access Management.
Lists all the commands described in this command manual in
an alphabetic order. The parts and pages where the
commands are described are also given.
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are optional.
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
The argument(s) before the ampersand (&) sign can be entered 1 to n
times.
A line starting with the # sign is comments.
Contents
Description