Public-Key Local Export Rsa - 3Com Switch 4500 Family Manual

public-key local export rsa

Syntax
public-key local export rsa { openssh | ssh1 | ssh2 } [ filename ]
View
System view
Parameters
rsa: Specifies the host public key of the current switch's RSA key pair.
openssh: Specifies the format of the exported public key as OpenSSH.
ssh1: Specifies the format of the exported public key as SSH1.
ssh2: Specifies the format of the exported public key as SSH2.
filename: Name of the file for saving the host public key, a string of 1 to 142 characters. For file naming
rules, refer to File System Management Command.
Description
Use the public-key local export rsa command to export the current switch's RSA key pair to a
specified file.
If you specify a filename, the command exports the host public key to the specified file and saves the file;
otherwise, the command displays the host public key on the screen.
SSH1, SSH2, and OpenSSH are three public key formats. You can choose one as required. For
example, if you want to export the RSA host public key to a file in the SSH1 format, use the
public-key local export rsa ssh1 filename command.
The host public key displayed on the screen is in a format that is not transformed and cannot be
used as the public key data for public key configuration.
Related commands: public-key local create, rsa local-key-pair create.
Examples
# Generate RSA key pair.
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Input the bits in the modulus[default = 1024]:
Generating keys...
...............................................++++++
......++++++
1-12