PSE Software Version
PSE Hardware Version
PSE CPLD Version
PSE Power-Management mode
Table 1-3 display poe powersupply command output description
PSE ID
PSE Legacy Detection
PSE Total Power Consumption
PSE Available Power
Power Peak Value
Power Average Value
Power Software Version
Power Hardware Version
PSE CPLD Version
PSE Power-Management mode
display poe temperature-protection
Syntax
display poe temperature-protection
View
Any view
Parameters
None
Description
Use the display poe temperature-protection command to display the enable/disable status of the
PoE over-temperature protection function on the switch.
Related commands: poe temperature-protection enable.
Examples
# Display the enable/disable status of the PoE over-temperature protection function on the switch.
:290
:000
:078
:auto
Field
Identification of the PSE
The enabled/disabled status of the nonstandard
PD detection
Total power consumption of the PSE
Available power of the PSE
Peak power value of the PSE
Average power value of the PSE
Version of the PSE software
Version of the PSE hardware
Version of the PSE complex programmable
logical device (CPLD)
PoE management mode on the port when the
PSE is overloaded:
The auto keyword indicates that the auto
mode
is
adopted,
management mode based on the PoE priority
of the port is adopted
The manual keyword indicates that the
manual mode is adopted in the PoE
management on the port
1-5
Description
that
is,
the
PoE