View
System view
Parameters
ascii: Transfers data in ASCII mode, which is used for transferring text files.
binary: Transfers data in binary mode, which is used for transferring program files.
Description
Use the tftp { ascii | binary } command to set the TFTP data transfer mode.
By default, the binary mode is adopted.
Examples
# Specify to adopt the ASCII mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] tftp ascii
TFTP transfer mode changed to ASCII.
tftp get
Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameters
tftp-server: IP address or the host name of a TFTP server, a string of 1 to 20 characters. If the switch
belongs to a cluster, the value cluster means to connect to the TFTP server of the cluster. For the
configuration of the TFTP server of a cluster, refer to the Cluster part in this manual.
source-file: Name of the file to be downloaded from the TFTP server.
dest-file: File name used when a file is downloaded and saved to the switch.
2-2