HABP counters :
Packets output: 0, Input: 0
ID error: 0, Type error: 0, Version error: 0
Sent failed: 0
Table 3-3 Description on the fields of the display habp traffic command
Packets output
Input
ID error
Type error
Version error
Sent failed
habp enable
Syntax
habp enable
undo habp enable
View
System view
Parameters
None
Description
Use the habp enable command to enable HABP for a switch.
Use the undo habp enable command to disable HABP for a switch.
By default, HABP is enabled on a switch.
If an 802.1x-enabled switch does not have HABP enabled, it cannot manage the switches attached to it.
So, you need to enable HABP on specific switches in a network with 802.1x enabled.
Examples
# Enable HABP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] habp enable
Field
Number of the HABP packets sent
Number of the HABP packets received
Number of the HABP packets with ID errors
Number of the HABP packets with type errors
Number of the HABP packets with version errors
Number of the HABP packets that failed to be
sent
3-3
Description