Display Ip Routing-Table Verbose - 3Com Switch 4500 Family Manual

Table 1-4 Description on the fields of the display ip routing-table statistics command
Field
Proto
Route
Active
Added
Deleted
Total

display ip routing-table verbose

Syntax
display ip routing-table verbose
View
Any view
Parameters
None
Description
Use the display ip routing-table verbose command to display the detailed information of a routing
table, including inactive routes and null routes. The information displayed includes route state descriptor,
statistics of the routing table, and detailed information of each route.
Examples
# Display the verbose routing table information.
<Sysname> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
Protocol: #DIRECT
*NextHop: 1.1.1.1
State: <Int ActiveU Retain Unicast>
Age: 20:17:41
**Destination: 1.1.1.1
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42
**Destination: 2.2.2.0
Routing protocol type
Total number of routes
Number of active routes
Number of routes added after the router is rebooted or the routing table
is cleared last time.
Number of routes deleted (Such routes will be freed in a period of time)
Total number of the different kinds of routes
Routes: 3
Delete: 62 Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 1.1.1.1(Vlan-interface1)
Cost: 0/0
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Cost: 0/0
Mask: 255.255.255.0
Description
* = Next hop in use
1-11