Reset Mac-Authentication - 3Com Switch 4500 Family Manual

4500 series
Hide thumbs Also See for Switch 4500 Family:
Table of Contents

Advertisement

Parameters
offline-detect-value: Offline detect timer (in seconds) setting. This argument ranges from 1 to 65,535
and defaults to 300. The offline detect timer sets the time interval for a switch to test whether a user
goes offline.
quiet-value: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and defaults to 60.
After a user fails to pass the authentication performed by a switch, the switch quiets for a specific period
(the quiet period) before it authenticates the user again.
server-timeout-value: Server timeout timer setting (in seconds). This argument ranges from 1 to 65,535
and defaults to 100. During authentication, the switch prohibits a user from accessing the network if the
connection between the switch and the RADIUS server times out.
Description
Use the mac-authentication timer command to configure the timers used in MAC address
authentication.
Use the undo mac-authentication timer command to restore a timer to its default setting.
Related commands: display mac-authentication.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-authentication timer server-timeout 150

reset mac-authentication

Syntax
reset mac-authentication statistics [ interface interface-list ]
View
User view
Parameters
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argument
in the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] }
&<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port index ranges for this
argument.
Description
Use the reset mac-authentication command to clear the MAC address authentication statistics. With
the interface keyword specified, the command clears the MAC address authentication statistics of the
specified port. Without this keyword, the command clears the global MAC address authentication
statistics.
Examples
# Clear the MAC address authentication statistics for port Ethernet 1/0/1.
1-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-port4500 pwr 26-port

Table of Contents