Display Arp Timer Aging - 3Com Switch 4500 Family Manual

Parameters
dynamic: Counts the dynamic ARP entries.
static: Counts the static ARP entries.
|: Uses a regular expression as the match criterion. For detailed information about regular expressions,
refer to Configuration File Management Command in this manual.
begin: Displays the number of ARP entries counted from the first one containing the specified string.
exclude: Displays the number of ARP entries that do not contain the specified string.
include: Displays the number of ARP entries containing the specified string.
regular-expression: A case-sensitive character string.
ip-address: IP address. The ARP entries containing the IP address are to be displayed.
Description
Use the display arp count command to display the number of the specified ARP entries. If no
parameter is specified, the total number of ARP entries is displayed.
Related commands: arp static, reset arp.
Examples
# Display the total number of ARP entries.
<Sysname> display arp count
14 entries found

display arp timer aging

Syntax
display arp timer aging
View
Any view
Parameters
None
Description
Use the display arp timer aging command to display the setting of the ARP aging time.
Related commands: arp timer aging.
Examples
# Display the setting of the ARP aging time.
<Sysname> display arp timer aging
Current ARP aging time is 20 minute(s)(default)
The displayed information shows that the ARP aging time is set to 20 minutes.
1-6