Ssh2 - 3Com Switch 4500 Family Manual

Description
Use the ssh user service-type command to configure service type for a user so that the user can
access specified service(s).
Use the undo ssh user service-type command to remove the service type specified for an SSH user.
The default service type for an SSH user is stelnet.
Related commands: display ssh user-information.
Examples
# Specify that user kk can access SFTP service.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh user kk service-type sftp
# Display the SSH user information.
[Sysname] display ssh user-information kk
Username
kk

ssh2

Syntax
ssh2 { host-ip | host-name } [ port-num ] [ prefer_kex { dh_group1 | dh_exchange_group } |
prefer_ctos_cipher { 3des | des | aes128 } | prefer_stoc_cipher { 3des | des | aes128 } |
prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } | prefer_stoc_hmac { sha1 | sha1_96 | md5 |
md5_96 } ] *
View
System view
Parameters
host-ip: Server IP address.
host-name: Server name, a string of 1 to 20 characters.
port-num: Server port number. It is in the range of 0 to 65,535 and defaults to 22.
prefer_kex: Specifies the preferred key exchange algorithm. You can select one from the following two
algorithms.
dh_group1: Diffie-Hellman-group1-sha1 key exchange algorithm. It is the default algorithm.
dh_exchange_group: Diffie-Hellman-group-exchange-sha1 key exchange algorithm.
prefer_ctos_cipher: Specifies the preferred client-to-server encryption algorithm, which is AES128 by
default.
prefer_stoc_cipher: Specifies the preferred server-to-client encryption algorithm, which is AES128 by
default.
3des: 3DES_cbc encryption algorithm. Support for this keyword depends on the number of
encryption bits of the software version. The 168-bit version supports this keyword, while the 56-bit
version does not.
des: DES_cbc encryption algorithm.
Authentication-type
publickey
1-29
User-public-key-name
null
Service-type
sftp