Holder Assy Retard 500 - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.13.21 HOLDER ASSY RETARD 500

REMOVAL
1. Remove 500 PAPER CASSETTE ASSY.
2. Remove CHUTE FDR ASSY 500.
3. Remove COVER RIGHT 500. (p.455)
4. Remove COVER LEFT 500. (p.453)
5. Remove CLUTCH ASSY FEED.
6. Remove DRIVE ASSY FEED. (p.458)
7. Remove HOUSING ASSY FEED.
8. Remove CHUTE ASSY 500. (p.466)
When performing the following work, take care not to
C A U T I O N
damage the LEVER 500 boss.
When performing the following work, take care not to lose
SPRING LEVER 500.
9. Remove LEVER 500 and SPRING LEVER 500 from CHUTE ASSY 500 while
bending down the bosses on both sides of LEVER 500.
When performing the following work, take care not to
C A U T I O N
damage the HOLDER ASSY RETARD 500 boss.
When performing the following work, take care not to lose
SPRING RETARD.
10. Remove HOLDER ASSY RETARD 500 from CHUTE ASSY 500 while bending
down the bosses on both sides of HOLDER ASSY RETARD 500.
DISASSEMBLY AND ASSEMBLY
(p.446)
(p.454)
(p.461)
(p.476)
500 PAPER CASSETTE & 500 PAPER FEEDER
10)-1
10)-1
9)-3
10)-2
9)-1
9)-1
9)-2
CAUTION CAUTION
Figure 4-168. Removal of HOLDER ASSY RETARD 500
Revision B
Leg_Sec03_038FA
468