Basic Specifications; Process Specifications & System; Printer Basic Specifications - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

1.2 Basic Specifications

1.2.1 Process Specifications & System
Printing method : Semiconductor laser beam scanning and dry
electrophotographic process with two ingredients
Light source : Semiconductor laser
Photoconductor : Organic photoconductor
Charging : Roller charging system
Development : Two ingredients
No contact developing system
Toner : Made up of two nonmagnetic ingredients
Primary transfer : Intermediate transfer belt method
Fixing : Heat roller and fuser belt system

1.2.2 Printer Basic Specifications

RESOLUTION
600 dpi
WARMING UP TIME
37 seconds or less: From turning the power on to ready-to-print status.
(at 22°C, 55% RH, rated voltage, 32MB memory)
30 seconds or less: From standby mode to ready-to-print status
(at 22°C, 55% RH, rated voltage, 32MB memory)
PRINT MODE
Color mode : Use four toners (CNYK) to print in full color
Monochrome mode : Use only black toner (K) and the highest print speed is
available.
PRODUCT DESCRIPTION
PRINTING SPEED MODE
Color mode (F/C)
Standard mode
Low speed mode 1 : Feed paper at low speed to maintain fixation when
Low speed mode 2 : Feed paper at low speed to maintain fixation when
Monochrome mode (B/W)
Standard mode
Low speed mode
Basic Specifications
: Feed (print) papers at the maximum speed of the color
mode.
printing on thick paper over 28 lb (105g/m
envelopes/labels).
printing on transparencies.
: Feed paper (print) at the maximum speed of the printer.
: Feed paper at low speed to maintain fixation when
printing on thick paper over 43 lb (163 g/m
transparencies/envelopes).
Revision B
2
) (including
2
) (including
21