Lv/Hvps - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.11.6 LV/HVPS

Avoid staticky places such as on a carpet especially when removing
C A U T I O N
or inserting a Board. Before starting work with the Board, make
sure to touch metallic portion of the printer connected to the earth
to let your body come out free of static electricity.
REMOVAL
1. Remove COVER ASSY LH. (p.295)
2. Disconnect all connectors from the LV/HVPS.
3. Remove the 6 screws (silver, with flange, 6 mm) fastening LV/HVPS to the main
unit.
4. Remove the top part of LV/HVPS from the protrusion of the bracket attached to
the main unit while taking out the front side of LV/HVPS from between the main
unit and COVER FRONT L, and remove LV/HVPS.
REINSTALLATION
1. Put the top part of LV/HVPS inside the protrusion of the bracket while inserting
the front side of LV/HVPS in between the main unit frame and COVER FRONT L
to attach LV/HVPS.
2. Fasten LV/HVPS to the main unit with the 6 screws (silver, with flange, 6 mm).
3. Connect all connectors to the LV/HVPS.
4. Attach COVER ASSY LH. (p.295)
DISASSEMBLY AND ASSEMBLY
2)
500 502 501
515
504
(1BTR)
508
(BCR)
509
(DEVE)
(Blue)
4)-1
3)
3)
3)
3)
3)
3)
Figure 4-111. Removal of LV/HVPS
ELEC
503
4)-2
Revision B
Leg_Sec03_111EB
407