Conditions For Storage And Transport; Ambient Temperature And Humidity; Storage Altitude; Dropping - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

1.6 Conditions for Storage and Transport

1.6.1 Ambient Temperature and Humidity

Condition Temperature (°C)
Normal
0 to 35
conditions
High 35 to 40
Harsh
conditions
Low -20 to 0
Note *1: Non-condensing

1.6.2 Storage Altitude

0 to 3, 100 m or less
For air transport, 0 to 15, 000 m. However, this assumes that the cargo compartment is
maintained at 70.9275 kPa or higher.

1.6.3 Dropping

There should be no damage on 1 corner, 3 edges, and 6 sides of the packages under the
conditions below.
Standard Main unit
500-sheet cassette unit
Option
Duplex unit
PRODUCT DESCRIPTION
Table 1-22.
1
Humidity* (%RH) Guarantee period
12 months after
15 to 80
manufacture
High 80 to 95
Max. 48 hours
Low 5 to 15
Table 1-23.
Drop
610mm
760mm
910mm
Conditions for Storage and Transport

1.6.4 Vibration

There should be no damage under the following conditions
Frequency : 5 to 55 Hz
Acceleration : 1.5 G
However, between 5 to 10 Hz, constant 7.5 mm
double amplitude is assumed.
Frequency sweep : Logarithmic sweep 10 minutes for one-way
Direction of application : X, Y, Z directions
Number of cycles : 3 cycles for each of XYZ directions (each 1 hour)
Revision B
35