Download Print this page

Epson Stylus Photo R340 Service Manual: Removing The Shaft Assy. Holder

Color inkjet printer.
Hide thumbs

Advertisement

EPSON Stylus Photo R340/350

2.3.11 Removing the Shaft Assy. Holder

Illustration
Carriage Unit
Head Cable
Anti-home Side
Hooked Tabs
Ribs
Figure 2-42. Removing the Shaft Assy. Holder (1)
Disassembly and Assembly
Hooked Tabs
1
C.B.S 3x6
(6-8kgf.cm)
Upper Paper
Guide
Guide
Pin
PE Lever Sensor
Hooked Tabs (x 4)
Shaft Assy. Holder
Parts/Components must be removed to remove the Shaft Assy. Holder.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing,
Rear Housing, Main Board Assy., ASF Assy.
Disassembly Procedure
1.
Move the Carriage Unit to the anti-home side.
2.
Remove the two screws (
2
3.
Release the two tabs ( ) that secure the Shaft Assy. Holder upward with
tweezers and pull out the guide pin ( ) from the Ink System Frame.
When performing the next step, be careful not to damage the PE
C A U T I O N
Sensor Lever as it comes into contact with the Upper Paper Guide.
4.
Press down the left side of the Upper Paper Guide (when viewed from the rear
of the printer) to release the PE Sensor Lever from the notch, and then slide
the Shaft Assy. Holder rightward to remove the assy. toward you.
When performing the next step, be careful not to damage the Head
C A U T I O N
Cable.
5.
Release the Head Cable from the eight tabs ( ) of the Shaft Assy. Holder.
Disassembly
Revision A
) that secure the Shaft Assy. Holder.
62

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R340

This manual also for:

Stylus photo 350

Comments to this Manuals

Symbols: 0
Latest comments: