Frame Assy-2Nd - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.5.3 FRAME ASSY-2ND

Step numbers with [ ] in the figure indicate the step of
C A U T I O N
reinstallation.
REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove CHUTE ASSY-FSR and COVER ASSY-RR 2ND.
3. Remove 2ND BTR ASSY. (p.348)
4. Remove PLATE BIAS-2ND ASSY.
5. Remove CAM ASSY-2ND. (p.350)
6. Remove SPRING-2ND fastening both the left and right sides of FRAME ASSY-
2ND to the main unit.
7. Remove the E-ring fastening the right-side shaft on FRAME ASSY-2ND to the
main unit, and slide BEARING-BRUSH CAM to the left.
When performing the following work, take care not to drop or lose
C A U T I O N
BEARING-BRUSH CAM.
8. Temporarily slide FRAME ASSY-2ND to the right, and draw out the shaft on
FRAME ASSY-2ND from the left-side bearing on the main unit, and remove
FRAME ASSY-2ND together with BEARING-BRUSH CAM.
9. Remove BEARING-BRUSH CAM from FRAME ASSY-2ND.
DISASSEMBLY AND ASSEMBLY
(p.341)
(p.358)
6)
CAUTION
Figure 4-61. Removal of FRAME ASSY-2ND (1)
TRANSFER
Revision B
6)
CAUTION
Leg_Sec03_146EB
346