Holder Assy Retard Msi - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.3.7 HOLDER ASSY RETARD MSI

REMOVAL
1. Remove FRAME ASSY-PH. (p.327)
2. Remove CHUTE MSI. (p.309)
3. Unhook the hooks of the PAPER GUIDEs on the left and right sides fastened to
SHAFT ASSY MSI, slide each PAPER GUIDE to the outside, and remove
CHUTE ASSY PAPER GUIDE.
4. Unhook the hooks of CORE on the left and right sides fastening SHAFT ASSY
MSI, and slide each to the outside.
5. Remove ROLL MSI. (p.308)
When performing the following work, take care not to lose SPRING
C A U T I O N
RETARD MSI.
6. Remove HOLDER ASSY RETARD MSI from FRAME ASSY BOTTOM while
bending down the boss on both sides of HOLDER ASSY RETARD MSI.
DISASSEMBLY AND ASSEMBLY
3)-1
3)-2
Figure 4-31. Removal of HOLDER ASSY RETARD MSI (1)
MSI
3)-1
4)-2
4)-2
4)-1
Leg_Sec03_508EB
Revision B
4)-1
3)-2
313