Lever-Latch Pr - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.6.6 LEVER-LATCH PR

REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove 2ND BTR ASSY. (p.348)
3. Remove FRAME ASSY-PH. (p.327)
4. Remove BCR CLN XERO ASSY.
5. Remove SENSOR TR-0. (p.361)
6. Remove GUIDE CRU ASSY AD.
7. Turn LEVER-LATCH PR in the direction of the arrow, match the notch on
LEVER-LATCH PR with the protrusion on the boss of GUIDE CRU ASSY AD,
and remove LEVER-LATCH PR.
REINSTALLATION
1. Match the notch on LEVER-LATCH PR with the protrusion on the boss of
GUIDE CRU ASSY AD, and attach LEVER-LATCH PR.
2. Attach GUIDE CRU ASSY AD.
3. Attach SENSOR TR-0. (p.361)
4. Attach BCR CLN XERO ASSY.
5. Attach FRAME ASSY-PH. (p.327)
6. Attach 2ND BTR ASSY. (p.348)
7. Attach COVER ASSY RH. (p.301)
DISASSEMBLY AND ASSEMBLY
(p.373)
(p.367)
(p.367)
(p.373)
Figure 4-81. Removal of LEVER-LATCH PR
XERO
Revision B
7)
Leg_Sec03_202FA
370