Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2.
Release the hooks (x2) on the rear of the Cartridge Box, and remove the CSIC
Assy upward.
CSIC Assy
Figure 4-77. Removing the CSIC Assy (2)
DISASSEMBLY/ASSEMBLY
4.2.5.6 Ink Supply IC Holder Assy
Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/
FFC
Upper Housing/Printhead/Hinge/Rear Right FAX Housing /Right Housing/Main
Board/CSIC Assy/ Wireless LAN Board
Removal procedure
Hook
C H E C K
P O I N T
1.
Cartridge Box Unit
Disassembly Procedures
The Ink Supply IC Holder Assy consists of the Ink Supply Tube
Assy and the Cartridge Box Unit. (See
If the replacement of Ink Supply IC Holder Assy is not
required, so as to minimize the related work, operate without
disconnecting the joint of the Printhead. (See
Printhead"
(p.133).)
Release the Head FFCs (x4) and the CR Encoder FFC from the ribs (x4)
behind the Cartridge Box Unit.
Ferrite core
Head FFC (x4)
CR Encoder FFC
Figure 4-78. Releasing the FFCs
Revision G
Fig.
4-52.)
"4.2.5.1
Rib
144
Confidential