Epson AcuLaser C1100 Service Manual page 389

EPSON AcuLaser C1100
REINSTALLATION
1. Attach Spring to Actuator.
2. With Chute on FUSER ASSY open, insert the shaft of Actuator to the main unit,
and attach together with Spring.
3. Match the connector and the boss on the FUSER ASSY side with the connector
and the hole on the main unit side, and attach FUSER ASSY.
4. Return the levers on both sides of FUSER ASSY, and firmly lock on the main unit.
5. Open COVER ASSY TOP.
6. Attach COVER TOP SIDE L. (p.286)
COVER TOP SIDE L cannot be attached on the main unit unless
C A U T I O N
the lever on FUSER ASSY is firmly locked.
7. Close COVER ASSY TOP.
8. In the case of the standard specification, close COVER FUSER.
9. In the case of the DUPLEX specification, close DUPLEX ASSY.
When replaced FUSER ASSY with a new one, clear the life counter
C A U T I O N
to zero. (Refer to "6.3.1 Maintenance Menu Items"
DISASSEMBLY AND ASSEMBLY
(p497))
FUSER
Revision B
389