Sensor Fuser In - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.5.2 SENSOR FUSER IN

REMOVAL
1. Remove CHUTE ASSY-FSR. (p.341)
2. Remove the 2 screws (silver, with washer, tapping, 8 mm) fastening DIODE
FUSER to CHUTE ASSY-FSR.
3. Remove DIODE FUSER from CHUTE ASSY-FSR.
4. Remove the screw (silver, with washer, tapping, 8 mm) fastening CHUTE-FSR
and PLATE DIS 2ND to CHUTE ASSY-FSR.
5. Remove PLATE DIS 2ND from CHUTE ASSY-FSR.
6. Remove CHUTE-FSR from CHUTE ASSY-FSR.
7. Disconnect connector (P/J111) from SENSOR FUSER IN.
8. Remove the screw (silver, tapping, 6 mm) fastening SENSOR FUSER IN to
CHUTE ASSY-FSR.
9. Remove SENSOR FUSER IN from CHUTE ASSY-FSR.
DISASSEMBLY AND ASSEMBLY
2)
Figure 4-59. Removal of SENSOR FUSER IN (1)
TRANSFER
3) 2)
5)
CAUTION
Leg_Sec03_144FB
Revision B
4)
6)
344