Pwba Dup-L - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.12.25 PWBA DUP-L

Avoid staticky places such as on a carpet especially when removing
C A U T I O N
or inserting a Board. Before starting work with the Board, make
sure to touch metallic portion of the printer connected to the earth
to let your body come out free of static electricity.
REMOVAL
1. Remove DUPLEX ASSY. (p.412)
2. Remove COVER-L DUP. (p.414)
3. Disconnect connector (P/J442), connector (P/J443) and connector (P/J444) from
PWBA DUP-L.
4. Remove the 2 screws (silver, tapping, 5mm) fastening PWBA DUP-L to DUPLEX
ASSY.
5. Unhook the hook on SUPPORT PWB fastening PWBA DUP-L to DUPLEX
ASSY, and remove PWBA DUP-L.
REINSTALLATION
1. Attach PWBA DUP-L to DUPLEX ASSY, and fasten by the hook on SUPPORT
PWB.
2. Fasten PWBA DUP-L to DUPLEX ASSY with the 2 screws (silver, 5mm).
3. Connect connector (P/J442), connector (P/J443) and connector (P/J444) to PWBA
DUP-L.
4. Attach COVER-L DUP. (p.414)
5. Attach DUPLEX ASSY. (p.412)
DISASSEMBLY AND ASSEMBLY
Figure 4-142. Removal of PWBA DUP-L
DUPLEX
Revision B
5)-2
4)
4)
5)-1
Leg_Sec03_139FA
3)
442